ATB230329AS07 Refrigeration Simulator System Vocational Training Equipment Equipment Equipment Refrigeration Trainer Equipment
Description:
- This educational simulator should be designed for training in the sector of computer-aided control of industrial systems and it simulates the operation of an industrial refrigeration system with two cold rooms: one for frozen products (L.T.: low temperature) and the other for fresh vegetable products (M.T.: medium temperature)
- It should enable to check the system behaviour and the importance of the involved parameters, once fixed the set-point values of reference variables
Experimental Capabilities:
- Studying the pressure-enthalpy diagram of a refrigerant
- Studying on the psychrometric chart the air transformations at the evaporator of a cold room
- Heat balances on refrigerant side and on air side
- Studying the heat losses of a cold room
- Analyzing the behaviour of a refrigeration system with a unique compressor/condenser set and double level of evaporation pressure
- How the difference between room temperature and evaporation temperature affects the relative humidity of a cold room for fresh food
- Analyzing the operation of an electronic expansion valve
- Analyzing the operation of an evaporation pressure regulator
- Proportional and ON/OFF control
- Programming and testing ON/OFF or PI control logics
Technical Specifications:
- Colour panel representing the refrigeration system
- Board for data acquisition and control of output signals to the actuators
- Connection with PC via USB cable
- 3 potentiometers for simulating the following analog inputs:
–L.T. room air temperature set-point
–M.T. room air temperature set-point
–M.T. room air relative humidity set-point
- 7 bargraph LEDs for simulating the following analog outputs:
–L.T. room air temperature
–L.T. room product temperature
–M.T. room air temperature
–M.T. room product temperature
–M.T. room air relative humidity control signal of the electronic expansion valve motor (L.T. room)
–control signal of the evaporation pressure regulator motor (M.T. room)
- 4 switches for simulating the following digital inputs:
–System operation enabling
–Cold rooms thermal insulation
–L.T. room solenoid valve enabling
–M.T. room solenoid valve enabling
- 6 LEDs for simulating the following digital outputs:
–system enabling
–compressor enabling
–L.T. room solenoid valve enabling
–M.T. room solenoid valve enabling
–freezing cycle operation
–refrigeration cycle operation
- Program for simulating the operation of the refrigeration unit control system
- Creation software that can be used to modify the applications programs according to customer’s needs
- Power supply: 230 Vac 50 Hz single-phase – 200 VA
