Important Note:
We recommend that you buy this product through our worldwide distributor, Mouser Electronics. Please click on the following link for more details: FMC-SDI Mezzanine Card
General Description
FMC card with dual, independent SDI inputs and dual loop-through outputs. Supports SD-SDI, ED-SDI, HD-SDI and 3G-SDI modes up to full HD1080p60 resolution. Does not require high-speed Gbit transceivers in the FPGA base-board as the SDI deserialization is built into the design. Features cable equalization and a simple LVDS interface with the FPGA logic. The card is compatible with all development boards that feature the standard FMC-LPC, FMC-HPC or FMC+ connector (ANSI/VITA 57.1). Examples include those from Xilinx®, Intel®, Avnet®, Digilent® and Microchip®.
Key Design Features
– Standard ANSI/VITA 57.1 FMC™ LPC, HPC or FMC+ connector
– 2 x SD-SDI, ED-SDI, HD-SDI, 3G-SDI independent inputs
– 2 x SD-SDI, ED-SDI, HD-SDI, 3G-SDI re-clocked (loop-through) outputs
– Support for: SMPTE 259M, SMPTE 344M, SMPTE 292M, SMPTE 424M and DVB-ASI
– Features standard 4 x BNC 75Ω connectors for coax cable
– Video resolutions up to 1920×1080 @ 60Hz (Full HD)
– Full SDI adaptive equalization on both channels
– Features a simple LVDS 5 x lane interface to the host device
– FMC card performs full clock recovery from the SDI signal
– Generates a clean recovered pixel clock for forwarding/video sync
– No need for embedded Gbit transceivers in the FPGA
– Support for SoCs like Zynq-7000 that don’t have embedded Gbit Rx/Tx
– 2 x M3 mounting holes for securing the FMC connector
– 2 x M3 mounting holes for supporting standoff ‘legs’
– Example RTL source-code provided for easy board bringup
– Compatible with a wide range of FMC base-boards
– Dimensions approx 10 x 6.7 cm
Base-board compatibility
Examples include:
SP605, ML605, ZC702, ZC706,
ZCU102, ZCU104, ZCU106, ZCU1275,
SP701, AC701, KC705, VC707, VC709,
KCU105, KCU116, KCU1250, VCU108, VCU110, VCU118,
ZedBoard, MicroZed (with FMC carrier), PicoZed (with FMC carrier)
Applications
– Video routing/muxing/switching
– General purpose video processing
– Video signal clock recovery/video synchronization
– Connectivity with SD-SDI, HD-SDI and 3G-SDI cameras
– Connectivity with a wide range of video broadcast equipment
– Simple method to integrate (royalty free) HD video into your FPGA design
View user guide
