DC Speed Control Module Electrical Machine Trainer Vocational Training Equipment

ASR6113E DC Speed Control Module Electrical Machine Trainer Vocational Training Equipment
1 Introduction
This experimental device can provide excitation voltage and armature voltage for DC motor, and the armature voltage can be adjusted between DC 0 and 220V to realize speed control of DC motor. Through the experiment, and master the principle and control mode, the corresponding knowledge and skills, suits, higher vocational colleges, secondary vocational schools and vocational school related professional teaching and skills training examination.
2 Training Panel Instructions
1. Enable switch
2. Adjustment of soft start time.
3. Excitation voltage output terminal –DC 220V/0.5A.
4. Dual control switch — power switch.
5. Current limit adjustment.
6. Potentiometer — armature voltage adjustment.
7. Armature voltage output terminal –DC 0-220v /4A.
8.Fuse
9. Power socket –AAC220V power supply.
3 Operation instruction
1. Carefully check whether there is any safety hazard in the power supply line before power supply. (for example, the copper wire of the insulating layer breaks out and is not allowed to be used)
2. Insert the power cord plug into the AAC22V power input socket and power the panel.
3. The test cases on the excitation voltage output terminals using AK4 test line is connected to the dc motor excitation winding terminals, the armature voltage output terminals on the test chamber used AK4 test line connected to the dc motor armature winding wiring terminals. (dc motor shunt connection mode is adopted here)
4. It will enable the single control button and power double control button to hit OFF state, and the potentiometer will rotate counterclockwise to the minimum. After checking, turn on the power double control button, and the whole device circuit is connected. Turn on the switch and adjust the potentiometer to adjust the speed of the dc motor.