ASL377 Convection and radiation educational equipment for schools Thermal Educational Equipment
- Description
Under real conditions, the heat transport between two objects is normally substance-bound, ie convection and/or heat conduction, and not substance-bound, ie radiation, at the same time. Determining the individual heat quantities of one type of transfer is difficult .
The SL 377 trainer enables users to match the individual heat quantities to the corresponding type of transfer. The core element is a heated metal cylinder located at the centre of the pressure vessel. The surface temperature of the heated metal cylinder is controlled. The surface temperature of the metal cylinder and the wall temperature of the pressure vessel.
The pressure vessel can be put under vacuum or positive gauge pressure. In the vacuum, heat is transported primarily by radiation. If the vessel is filled with gas and is under positive gauge pressure, heat is also transferred by convection. It is possible to compare The heat transfer in different gases. In addition to air, nitrogen, helium, carbon dioxide or other gases are also suitable.
Heat transport by conduction is largely suppressed by adequately suspending the metal cylinder.
2, can be realised with compressed air. Two pressure sensors with suitable measuring ranges are available for the pressure measurement: a Pirani sensor measures the negative Pressure while a piezo-resistive sensor measures the positive pressure.
The measured values can be read on digital displays.
- Technical details
Specification
Heat transfer between heated metal cylinder and vessel wall by convection and radiation
Operation with various gases possible
Experiments in vacuum or at a slight positive gauge pressure
Electric heated metal cylinder in the pressure vessel as
Temperature-controlled heating element
Vacuum generation with rotary vane pump
Instrumentation: 1 temperature sensor on the metal cylinder, 1 power sensor at the heating element, 1 Pirani pressure sensor, 1 piezo-resistive pressure sensor
Digital displays for temperature, pressure and heating power
Technical data
Heating element
Output: 20W
Radiation surface area: approx. 61cm2
Pressure vessel
Pressure: -1…1,5bar
Volume: 11L
Pump for vacuum generation
Power consumption: 250W
Nominal suction capacity: 5m3/h
Final pressure with gas ballast: 3*10-3mbar
Final pressure without gas ballast: 3*10-3mbar
Measuring ranges
Negative pressure: 0,5*10-3…1000mbar
Pressure: -1…1,5bar rel.
Temperature: 0…250°C
Power: 0…23W
230V, 50Hz, 1 phase
230V, 60Hz, 1 phase; 120V, 60Hz, 1 phase
UL/CSA optional
Required for operation
Compressed air: min. 1,5bar
PC with Windows recommended