ATB20230308R-002 Control Hydraulic Trainer (Single Side)
Features:
The training equipment covers the hydraulic drive, transmission relay control, PLC automatic control, sensor application technology and other technical fields,
which integrates hydraulic transmission technology and various modern control technology.
Technical Specification :
– Power part : with leakage protection function, the power will be disconnected automatically due to wiring error and short circuit is caused
– The supply voltage : three-phase five-wire AC 380 V ± 5%, 50Hz;
control voltage: ADC24V / +12 V
– Machine capacity : approx. 1 kVA
– Working temperature : -5 ℃ ~ 40 ℃
– Working humidity : approx. 90% (40 ℃)
Configuration :
1 set training bench approx. 1600x650x1800 mm min. 1 set Three phase power module approx. 300×280×100 mm
min. 1 set button module approx. 300×280×100 mm
min. 1 set Intermediate relay module approx. 300×280×100 mm min. 1 set Oil pump control module approx.
300×280×100 mm min. 1 set PLC module approx. 300×280×100 mm
min. 1 pcs Programming cable match with PLC
min. 1 pcs COM port extension line approx. 1500 mm min. 1 pcs Power cable
min. 1 set Industrial oil pump
min. 1 pcs Oil pump power cable approx. 2m min. 1 pack Safety plug cable
min. 1 set Oil tube 8 drift diameter 2 pcs Oil tube 13 drift diameter
1 set Hydraulic components as follows : Double-acting hydro-cylinder (2 pcs)
– Max. Travel :100 mm
– Cylinder diameter :approx. 50 mm
– Related pressure : approx. 7 Mpa
– Voltage : approx. 16 MPa
– Lowest start pressure : approx. 0.3 MPa
Single –acting oil –cylinde (1 pcs)
– Max. travel:50mm
– Cylinder diameter :approx. 40 mm
– Related pressure : approx. 7 Mpa
– Voltage :approx. 16 MPa
– Lowest start pressure :approx. 0.6 MPa
Single way throttle valve (2 pcs)
– Drift diameter : approx. 10 mm
– Max. working pressure : approx. 35 Mpa
– Flow range : approx. 0-50 L/Min
Check valve (2 pcs)
– Drift diameter :approx. 10 mm
– Max. working pressure : approx. 31.5 Mpa
– Min. start differential pressure : appro . 0,05 MPa, If flow speed =6m/s, Q=30L/Min
Hydraulic control check valve (min. 2 pcs)
– Drift diameter :approx. 10 mm
– Max. working pressure :approx. 31.5 Mpa
– Min. start pressure :approx. 0.25 Mpa
– Control pressure : approx. 0.5-31.5MPa. If flow speed
=6m/s, Q=30L/Min
Relief valve/direct acting (min. 2 pcs)
– Drift diameter :approx. 6 mm
– Max.back pressure : approx. 31.5 Mpa
– Min. Start differential pressure :approx. 0.5 MPa
Relief valve/pilot (min. 1 pcs)
– Drift diameter :approx. 10mm
– Max.back pressure :approx. 31.5 Mpa
– Min. start differential pressure:approx. 0.5 Mpa
– Max. control pressure : approx. 31.5 Mpa
Single way sequence valve (2 pcs)
– Drift diameter :approx. 10 mm
– Max. working pressure :approx. 31.5 Mpa
– Min. Start differential pressure :approx. 0.5 Mpa
Single way speed control valve (min. 2 pcs)
– Related flow :approx. 15 L/Min
– Max. working pressure:approx. 21 Mpa
– Effect of temperature and pressure : approx. in range 2%- 5%
Pressure reducing valve (min. 1 pcs)
– Drift diameter : approx. 10 mm
– Max. working pressure : approx. 35 Mpa
– Outlet pressure range :approx. 1-35 Mpa
Two position three way solenoid directional valve (min. 1 pcs)
– Drift diameter : approx. 6 mm
– Working pressure:approx. 31.5 Mpa Normally open , 24V control
Two position four way solenoid directional valve (min. 2 pcs)
– Drift diameter : approx. 6 mm
– Working pressure : approx. 31.5 Mpa
– 24V control Single electromagnet
Three position four way solenoid directional valve/O (min. 1 pcs)
– Drift diameter : approx. 6 mm
– Working pressure : approx. 31.5 Mpa
– M type medium function, 24Vcontrol double electromagnet
Three position four way solenoid directional valve/H (min. 1 pcs)
– Drift diameter : approx. 6 mm
– Working pressure : approx. 31.5 Mpa
– M type medium function, 24V control double electromagnet
Three position four way solenoid directional valve/M (min. 1 pcs)
– Drift diameter : approx. 6 mm
– Working pressure : approx. 31.5 Mpa
– M type medium function, 24V control double electromagnet
Three position four way solenoid directional valve/P (min. 1 pcs)
– Drift diameter :approx. 6 mm
– Working pressure:approx. 31.5 Mpa
– M type medium function, 24V control double electromagnet
Three position four way solenoid directional valve/Y (min. 1 pcs)
– Drift diameter :approx. 6 mm
– Working pressure :approx. 31.5 Mpa
– M type medium function, 24V control double electromagnet
Three position four way manual directional valve (min. 1 pcs)
– Drift diameter :approx. 6 mm
– Working pressure :approx. 31.5 Mpa
– Valve core function : M type
– Handle control with internal positioner Pressure relay (min. 1 pcs)
– With 24VLED display
– Max. pressure setting : 10Mpa Min. pressure setting : 0.1Mpa Related
– Voltage :approx. 10 Mpa
Tee (min. 4 pcs)
– Model:approx. 50×30×30 mm
– Drift diameter : approx.6 mm
– Working pressure:approx.7 Mpa
– Max. pressure :approx.31.5 Mpa
System unloading valve (min. 1 pcs)
Glycerine pressure gauge range 0-10MPa (min. 4 pcs) High pressure oil rubber hose (min. 6 pcs)
– Model :10-1-25.6Mpa
– Length :approx. 60cm
High pressure oil rubber hose (min. 8 pcs)
– Model :10-1-25.6Mpa
– Length :approx. 80cm
High pressure oil rubber hose (min. 8 pcs)
– Model :10-1-25.6Mpa
– Length :approx. 120cm
High pressure oil rubber hose (min. 2 pcs)
– Model :10-1-25.6Mpa,
– Length:approx. 150cm
Transparent oil hose, inner diameter approx. 10mm (1 meter)
Suppied including:
– Standard accessories
