ATB20230308R-001 PLC Control Pneumatic Trainer (Single Side)
Features:
– The equipment is composed of pneumatic component, electrical control, training
platform and etc.
– The electrical part is mainly consisted of PLC module, relay module, power module,
button module and etc. Technical Specification:
– Power parts: with leakage protection function, the power will be disconnected
automatically due to wiring error and short circuit is caused
– The supply voltage: three-phase five-wire AC 380 V ± 5%, 50Hz
– Control voltage ADC24V / +12 V
– Machine capacity: approx. 1 kVA
– Working temperature: -50 ~ 40 0 C
– Working humidity: approx. 90% (400 C) Configuration:
1 set training bench approx. 1600x650x1800 mm consist of: power module, button module, intermediate relay module PLC host module,
Programming cable match with PLC, COM port extention line, compressor.
min. 10pcs tube plug diameter Ø 6 min. 30m air tube diameter Ø 6 min. 1 pack safety connection line min. 1 pcs power socket
min. 1 pcs power cable
min. 1 set pneumatic component as follows : min. 3 pcs mini cylinder
min. 1 pcs mini cylinder min. 1 pcs FRL
min. 6 pcs One way throttle valve
min. 2 pcs button type manual valve (normally open) min. 2 pcs button type manual valve (normally close) min. 4 pcs Roller lever type mechanical valve
min. 1 pcs Knob valve
min. 1 pcs Manual control two position five way valve
min. 1 pcs Single pneumatic control two-position three-way valve (normally open)
min. 1 pcs Single pneumatic control two-position three-way valve (normally close)
min. 2 pcs Single pneumatic control two-position five-way valve
min. 2 pcs Double pneumatic control two position five way valve
min. 1 pcs Double pneumatic control three position five way valve
min. 1 pcs Single electrical control two-position three way valve (Normally open)
min. 1 pcs Single electrical control two-position three way valve (Normally close)
min. 2 pcs Single electrical control two-position five way valve
min. 1 pcs Double electrical control two-position five way valve
min. 1 pcs Double electrical control three-position five way valve
min. 2 pcs Shuttle valve (or gate valve)
min. 2 pcs Double pressure valve (gate valve) min. 1 pcs quick exhaust valve
min. 1 pcs Time-delay valve (normally close) min. 1 pcs Time-delay valve (normally open) min. 1 pcs Reducing valve with pressure gauge min. 10 pcs Tee Ø 6
min. 6 pcs electronic control travel switch min. 1 pcs accumulator approx. 1L
min. 1 pcs two position three way pressure sequence valve min. 1 pcs pressure relay
Supplied including:
– Standard accessories
