ASR1636 Torsion And Bending Didactic Education Equipment For School Lab Mechanical Experiment Equipment
I. Overview
This equipment is for mechanical engineering department or mechanics engineering department in university, it’s for Theoretical and Applied Mechanics, Engineering Mechanics, Solid Mechanics major and other mechanics related department.
The apparatus is used for torsion and bending tests on different materials. It is to be used with Universal Base Frame or Universal Structural Frame (separately supplied)
The apparatus consists of two columns attached to the base frame. One column has a top support for bending specimen, and a clamp for torsion specimen. The other column also has a top support for bending specimen with a pulley freely rotates in the column.
For bending test, the specimen is placed on or clamped to the supports on top of the columns. Load is applied to the specimen and deflection is measured by a dial gauge.
For torsion test, one end of the specimen is clamped to the column, and the other end is clamped to the pulley. A lever arm is attached to the specimen at any length from the first column. Angle of twist is measured by a dial gauge for the lever movement. Torque is measured by the load and the pulley diameter.
Instruction manual is also included.
II. Technical data
Structure: aluminum
Bottom with adjustable rubber to adjust the height.
The total weight is less than 200kgs.
Working environment: -10℃~40℃， Humidity<85%
III. Typical Experiments
Bending moment variation at the point of loading
Variation of bending moment away from the point of loading
Examination of various other loading cases
