Vacuum-luminescent tube.
An oscilloscope tube for visual registration of physical processes.
Focusing
the beam is electrostatic.
The deflection of the beam is electrostatic.
The screen has a
green glow.
Afterglow of the screen is not more than 0.1s.
The decoration
is glass, groundless (RSH31).
Weight 0.2 kg.
Basic data:
When U h = 6.3V, U a2=500V
The width of the line in the center of the screen is not more than 0.3 mm
at a distance of 3/8 of the max. diameter of the bulb is not more than 0.4 mm
The brightness of the screen glow is not less than 5 Cd/M2
Incandescent current 600 mA
Voltage of the 1st anode focusing 0-50 V
The voltage of the modulator locking -30…-90 V
Sensitivity to deviation
temporary plates D 1,D 2 not less than 0.15 mm/In
signal plates D 3,D 4 not less than 0.18 mm/V
Operating time of at least 825 hours.
Evaluation criteria
the width of the line in the center of the screen is not more than 0.4 mm
parasitic emission not more than 0.05 cd/m2
Maximum operational data:
Glow voltage 5.7….6.9 V
The voltage of the first anode is not more than 150 V
The voltage of the second anode is 500….800 V
Modulator voltage -125….0 V
The heater voltage relative to the cathode is -125…0 V
The voltage between any of the plates and the 2nd anode is -450….+450 V
The total resistance in the circuit of any of the deflecting plates at a frequency of 50 hz is not more than 2 mOhm
The resistance in the modulator circuit is 1.5 mOhm
Application:
“Modulator of the stereo signal MOD-13”
This modular modulator with extendable blocks.
The module where the 3LO1I tube is used is called BVI-1.
The equipment was used as part of VHF transmitting stations.
In the long-distance communication equipment (wired) there were STGO racks (a rack
of tertiary generator equipment).
The rack included an oscilloscope unit with
a 3LO1I tube.
It was used to adjust the master generator to the
signal of the reference source.
