“Petal”
Foreign analogues: EM80, 6EM81, 6BR5, 6DA5, 65ME.
Electronic light indicator.
Designed for visual tuning of amplitude modulated radios
and indication of the recording level in tape recorders.
The glow color of the screen is green.
Weight not more than 20 g.
Main technical characteristics of the 6E1P lamp:
Glow voltage—6.3 ± 0.6 V
Incandescent current—300 ± 25 mA
The anode voltage is nominal (constant)—100 V
Anode voltage limit (constant)—250 V
Anode current—2 ± 1.5 mA
The voltage of the crater anode is nominal (constant)—250 V
The voltage of the crater anode is the highest (constant)—250 V
The voltage of the crater anode is the lowest (constant)—150 V
Crater anode current (max.)— 4 mA
Grid voltage (constant)—2 V
Reverse grid current (no more)—0.5 mkA
The power dissipated by the anode, the limit—0.2 W
The voltage between the cathode and the heater is the limit (constant)—300 V
Steepness of the characteristic (not less than)—0.5 mA/V
Gain—24 ± 10
The resistance in the grid circuit is the limit—3 mOhm
Guaranteed durability (at least)—1500 hours.
Weight not more than 20 g.
Operating instructions:
When operating the lamp, the values of the values that determine the operating mode
they must not exceed the specified maximum permissible values. Non-fulfillment
this requirement may cause the lamp to lose its operability.
Operation of lamps at two or more maximum permissible values,
determining the operating mode is not allowed.
The maximum permissible short-term bending force on the lamp pin in
the direction perpendicular to the pin axis should not exceed 0.5 kgf,
and long–acting – 0.2 kgf.
