AZM7126 Bench Of The Dynamics Fluid Vertical school teaching equipment Hydrodynamics Experiment Apparatus
The bench should allow the following educational farms:
-use a pitot-static tube to determine the velocity profile in a pipe
-Measurement flow by pressure devices; Venturi and diaphragm
-Studies Head losses in the following organs:
smooth -Tubes
-tube Artificially roughened
-Loss Charge in a straight pipe
-Elargissement and sudden narrowing
-Coudes and curves
-Vannes
-Crépine Online
Technical specifications required:
The bench should include 35 catches distributed pressures as follows:
smooth -Tubes several diameters (13.6, 17, 26.2 mm)
-Tube Artificially roughened (effective dia 14 mm – 17 mm dia)
-Coude 90 degrees (13.6 mm radius)
-Coude 90 ° at right angles
-Courbes Smooth 90 degree (50, 100 and 150 mm radius)
-Elargissement And sudden narrowing (13.6 / 26.2 mm)
-Vanne To seal, globe valve and ball valve
-Venturi Dia. 26-16 mm
-Orifice Dia. 20 mm
-tube pitot static with through-wall system and micrometric Measurement
displacement in the pipe
-Crépine Online with two different filters
-Tubes smooth with 4 mm dia int
-Measurement pressures by 3 double piezometric tubes mounted on a separate chassis
the low pressure and by pressure gauge differential pressure in the valves and
strainer
-Supplied with separate hydraulic power volumetric bench on wheels.
