ASE130 CONVECTION DRYING educational lab equipment Hydrodynamics Experiment Apparatus
- Product Overview
1.1 Product Introduction
Convection drying is a drying method that uses hot gas as a heat source to remove steam generated by wet materials during the drying process of wet materials. It is generally called convection drying. Convection dryers are commonly used for solids drying in food technology. It is the most widely used drying method. This device can be used to study and demonstrate the convection process. There are four corrosion-resistant removable plates for drying solids and they are placed in the drying tunnel. The plate containing the solid to be dried is exposed to the air flow in the channel. The air flow heats the solids while removing the released moisture. The air speed can be adjusted by the speed of the fan. Adjustable heater allows air heating. Through the transparent door, the drying process can be observed in the drying tunnel. Digital balances can be used to track changes in the weight of solids caused by water evaporation during operation. Air temperature and air relative humidity are measured and displayed by a single temperature and humidity sensor before and after the airflow passes through the solid. Another sensor measures the air speed.
1.2 Product composition
1 fan 2 temperature and humidity meter A 3 temperature and humidity meter B 4 anemometer 5 heater switch (3) 6 air duct 7 particle shelf 8 anemometer 9 emergency stop button 10 wind speed adjustment knob 11 fan switch 12 main power switch
1.3 Features
The metal frame is corrosion-resistant and can be easily moved.
The transparent observation window can easily observe the progress of the experiment.
1.4 Performance parameters
Dimensions: 2350mm*800mm*1200mm
Overall weight: <175kg
Equipment power supply: AAC380±10V
1.5 practical training items that can be completed
The drying process of solid particles
1.6 Precautions (operating conditions)
(1) Before the power-on experiment, check whether the pipeline is blocked or debris, and conduct the power-on experiment after cleaning.
(2) During the experiment, the air duct must be kept clear and there is no obstruction around the fan.
(3) During the experiment, the surface temperature of the air duct may cause burns. Pay attention to physical contact.
(4) The equipment must be reliably grounded!
- Experimental content
Understand the drying process of solid particles and understand the principle of solid particles drying.
