AZM9103 Fluid Test Bench Didactic Equipment Hydraulic Workbench

1. Product overview

1.1 Overview

The fluid circulating in the pipe is subjected to frictional forces resulting in energy loss and overall pressure drop. There is a distinction between conventional pressure losses due to friction on the walls, which vary according to the obstacles the fluid encounters.

The Workbench for Fluid Dynamics studies can highlight pressure losses at these various points. The workbench is equipped with a differential pressure sensor and a pressure sensor, and the pressure value can be observed through the display screen. The flow of fluid can be observed through transparent tubing, and laminar and turbulent phenomena of fluid can be observed by injecting dye for treatment.

1.2 Features

The training device uses a steel frame as a whole, the exterior is sprayed with anti-corrosion treatment, and the bottom is equipped with a universal wheel for easy movement.

2 performance parameters

Input power: AAC220V±10% 50Hz

Power: 500W

Dimensions: 2000mm×800mm×1900mm

Centrifugal pump: Power: 370W Speed: 2900 r/min Maximum flow 3m³/h Maximum lift: 20m

Working conditions: Ambient temperature 5℃～+40℃ Relative humidity ＜85%（25℃）

Flow meters: 30-300l/h and 300-3000 l/h

Plexiglass tube: diameter 20mm and 25mm

PVC pipe: diameter 20mm

Elbow 30°, 45°, 75°, 90° and 135°

Enlargement and sudden reduction: diameter ADN15–ADN25

3.can complete the experiment

Experiment 1 Flow regulation experiment

Experiment 2 Differential pressure sensor experiment

Experiment 3 Multi-tube pressure gauge experiment

Experiment 4 Turbulence and Turbulence Experiments

Experiment 5 Venturi Experiment