TB-220804-V-4.16 Reciprocating Compressor Operation Laboratory Equipment Educational Equipment Heat Transfer Training Equipment
I.Introduction of thermal dynamics
Thermodynamics is a discipline that studies the properties and laws of thermal motion of matter from a macroscopic perspective. It belongs to the branch of physics, and it and statistical physics constitute the macroscopic and microscopic aspects of thermal theory respectively.
Thermodynamics mainly studies the thermal properties of matter from the point of view of energy transformation. It suggests the macroscopic laws that energy follows when transforming from one form to another, and summarizes the thermal theory obtained from the macroscopic phenomena of matter. Thermodynamics does not investigate the microscopic structure of matter composed of a large number of microscopic particles, but only cares about the thermal phenomena exhibited by the system as a whole and the basic laws that must be followed for its change and development. It is satisfied to describe and determine the state of the system with a few macroscopic state quantities that can be directly felt and observed, such as temperature, pressure, volume, concentration, etc. Through a large number of observations and experiments on thermal phenomena in practice, it is found that there is a relationship between the macroscopic state quantities, and their changes are mutually restrained. In addition to the properties of matter, the constraint relationship must also follow some basic thermal laws that are applicable to any matter, such as the zeroth law of thermodynamics, the first law of thermodynamics, the second law of thermodynamics, and the third law of thermodynamics. Thermodynamics is the basis and starting point of the above-mentioned basic laws obtained from experimental observations, applying mathematical methods, and through logical deduction, to obtain the relationship between various macroscopic properties of matter and the direction and limit of macroscopic physical processes, so it belongs to phenomenology. theory, and the conclusions drawn from it have a high degree of reliability and generality.
II.Technical specifications
Equipment type
▪ tabletop equipment
▪ electrical
▪ with ability to connect, transfer and process data with laptop
Equipment shall consist of at least the following
▪ air reciprocating compressor
▪ electric drive
▪ sensors
▪ electronic control unit
▪ special software
▪ laptop for equipment control and display of measurement results
▪ all designations, nameplates and inscriptions on the casing and display interface shall be in English and/or Russian
Special software
▪ availability
▪ perpetual license
▪ compatible with the equipment
▪ intended for collecting and processing data with laptop
▪ interface in Russian and/or English
Overall dimensions at least 1000x600x600 mm
Weight at least 20 kg
Power at least 2 kW
Power supply
▪ 220V ± 10%, 50Hz, if necessary, complete with adapter
▪ power cable, European standard
III.Delivery set
Equipment shall be delivered as a complete set and compatible with design and functionality
▪ Delivery set shall include, but not be limited to:
1. Reciprocating Compressor Operation Laboratory Equipment – 1 set
2. Laptop connecting cables – 1 set
3. Special software – 1 set
4. Laptop (CPU frequency of at least 2.3 GHz (at minimum load); 4 processor cores; at least 6 processor threads; AL3 Cache – 8 MB; RAM – ADDR4; at least 8 GB of memory; frequency at least 2933 MHz; SSD 512GB; M.2 PCIe NVMe; USB Type-A – 2 pcs.; USB Type C – 1 pc.; HDMI port; Wi-Fi and Bluetooth 5.0 adapters; display: 1920×1080; screen size 15.6 inches; 250 nits; IPS with LED backlight; matte screen; stereo speakers, microphone and built-in camera), including mouse, power supply with cable and bag for storage and carrying – 1 set
5. Description of possible laboratory works with Reciprocating Compressor Operation Laboratory Equipment (in Russian) – 1 set
6. Tools for installation and maintenance of the Reciprocating Compressor Operation Laboratory Equipment – 1 set
7. Accessories, spare parts and consumables not listed above, but recommended by the Manufacturer – 1 set
